AN hardware is a critical part of building an aircraft. In this presentation Kerry Fores, Kitplanes magazine contributing editor and award winning aircraft builder, will go over the basics of properly installing AN hardware. Kerry is retired from a 20 year career at Sonex Aircraft, most of it focused on providing builder support.
Many builders express concern over seller’s liability. In this presentation, attorney Kathy Yodice will discuss the facts around this issue and steps a builder can take to reduce their risk. Kathy is the vice chair of the EAA Legal Advisory Council.
Vic Syracuse will discuss the errors he sees repeatedly on pre-buy & DAR inspections.
Join EAA staff member and Pietenpol builder, John Egan who will share information on wood selection, construction techniques, and other important selected topics.
Joe Norris, amateur built DAR, will cover the basics of how to perform a weight and balance calculation on your aircraft. He will then explain what calculations and paperwork the FAA inspector or DAR needs for your airworthiness application.
Sebastien Heintz and Roger Dubbert will discuss their designs and engine options to help you decide if this is the kit to build.
An analysis of fatalities in experimental amateur built aircraft over the past 13 years to identify common causes and elements of training or technology which could help reduce the chances of being involved in an accident.
Van’s Aircraft will discuss their kits, the mission of each design, and provide an update on the development of the new RV-15.
Budd Davisson, Sport Aviation columnist and Homebuilders Hall of Fame inductee, will cover the advantages of gas welding and some tips on getting started.
Brad Brensing, Garmin Experimental/LSA Sales Manager, will discuss screen selection, panel and remote mount avionics options, interface capabilities, and additional resources.
Get all the latest information on the new Sonex Highwing! Sonex owner and president Mark Schaible will brief the audience on the progress of the first prototype aircraft.
Join FAA Designated Airworthiness Representative Joe Norris as he explains what a builder needs to do to successfully navigate the FAA’s required processes.
Join EAA’s Jack Pelton, Sean Elliott and Rob Hackman as they discuss current issues for owners and builders of amateur-built aircraft and challenges to the aviation industry.
Mike Busch A&P/IA offers a series of real-life stories that demonstrate how engine monitor data analysis can be used to provide precise, accurate, pinpoint diagnosis.
This presentation will review considerations of engine acquisition options including certificated versus experimental engines and rebuilt versus overhauled. It will also review basic engine terminology and nomenclature.
Rob Hickman from Advanced Flight Systems will discuss additional ways you can reduce your instrument panel installation time with an ADVANCEDPANEL.
Vic Syracuse will share with you the things you need to know before buying a finished and flying homebuilt.
Learn the basics of how to work with composites in aircraft construction projects. EAA SportAir instructor Scott VanderVeen will share what you need to know to be successful.
Paul Dye presents a look at the things a builder/pilot should consider in planning, training for, and executing a flight test program on their new homebuilt aircraft.
This session will not only help you develop the best paint scheme to highlight the beauty of your aircraft, but will also help you develop your design within a frame work of living within a budget for applying the paint scheme design.
In this webinar, we'll cover general considerations such as matching your avionics to your flying and budget, product choices, and configurations from Dynon Avionics.
